Description
Highly integrated LCD controller that interfaces HDMI and DisplayPort digital video inputs in virtually any format to a flat-panel display.
The VIN6038-NYCTA is optimised for high-performance flat panel monitors and features an advanced image processor with internal HDMI and DisplayPort.
Computer, VGA to WUXGA (1920X1200), images can be scaled to fit a target display device with any resolution, up to WUXGA.
Optimisation circuitry creates sharp, clear images centred on the screen without user intervention.
The VIN6038-NYCTA includes a light sensor for automatic backlight control, a temperature sensor for programmable fan control and a backlight fault alarm, and has innovative self-diagnostic capabilities with the ability to communicate its status via RS232.
Using VIN6038-NYCTA increases monitor reliability and drastically reduces downtime.
HDMI and DisplayPort inputs are compatible with HDCP (High-bandwidth Digital Content Protection).
Technical Specifications
Chip Set
Panel Connectivity
- All LCD TFT Panels up to 1920X1200 - 4:3 and 16:9
Graphic Digital (HDMI) Interface
- 1 HMDI Standard Connector
- HMDI 1.3 compliant Rx
- Supports resolutions up to 1080p/WUXGA 1920X1200@60Hz
- Deep colour and wide gamut support: 12-bit HDMI input at YCC 4:4:4
- Backwards compatible with DVI
- Supports integrated HDCP
Graphic Digital (DisplayPort) Interface
- 1 DisplayPort Standard Connector
- 4-lane DisplayPort 1.1a compliant Rx
- One auxiliary channel
- Supports integrated HDCP
Control by On-Screen Display (OSD)
- Brightness (Backlight adjustment)
- Contrast
- Sharpness
- Colour Temperature
- Audio Control (External Audio Amplifier)
- LVDS Output Mapping National/JEIDA
- LVDS Pixel Order Swapping Odd/Even
- Set-up Temperature Fan ON
- Auto Backlight ON/OFF
Control Modes
- Seven push-buttons
- Infrared (Optional)
- One Serial RS232
Analog and Digital I/O
- 1 Analog in 0-5V 10-KOhm
- 1 TTL in 10-KOhm P.U.
- 2 LVTTL out 25mA T.P.
Output Panel Signal
- 18/24bit Single or Dual LVDS
Panel Power Supply
- 3.3 - 5 - 12 VDC / 3A Max.
Inverter Support
- 12/24 VDC Power
- Enable pin signal
- Analog Dimmer adjust 0 - 3.3VDC or Digital PWM pin signal
Measurement
- Inverter Current 0-15 ADC Max
- Inverter Voltage 0-26 VDC Max
- Panel Current 0-3 ADC Max
- Panel Voltage 0-12 VDC Max
- On-board temperature -40°C to 85°C
- Ambient Light Dark to 10,000 Lux (Relative measure)
Fan Control
- 1 line setup via OSD 12-24VDC 2°
Power requirements
- 12 -24VDC Max 2.5W Only VIN6038-NYCTA Control Board