Description
The VIN338 Airport is a highly integrated card that interfaces digital DVI, RGB and video inputs in virtually any format with a display. It is optimized for high-performance, value line, flat-panel monitors in critical Video information applications (airport, railway, banking, etc.).
The VIN338 Airport features the latest generation of image processor with internal HDMI, 10-bit ADC, video decoder and an external memory interface to support more advanced windowing capabilities and high-resolution displays.
Features include full 10-bit data processing, high-quality motion-adaptive deinterlacing up to 1080i with advanced low-angle processing, frame-rate conversion, Picture-in-Picture (PIP), Picture-off-Picture (POP), and advanced high-quality scaling. In addition, the image processor offers programmable PixelBoost™ technology, advanced 3D noise reduction and a 3D comb filter to support the built-in video decoder, and has innovative self-diagnostic capabilities with the ability to communicate its status via RS232/485.
Computer, VGA to WUXGA (1920X1200), video images can be scaled to fit a target display device with any resolution, up to WUXGA.
Optimisation circuits enable the creation of sharp and clear images, centred on the screen, without user intervention.
VIN338 Airport supports NTSC, PAL, SECAM, RGB - Y/Cb, Cr video data with a 4:3 aspect ratio and 16:9 aspect ratio sources, such as DVD or HDTV.
Using VIN338 Airport increases monitor reliability and drastically reduces downtime.
Technical Specifications
Chip Set
Panel Connectivity
- All LCD TFT Panels up to 1920X1200 - 4:3 and 16:9
Graphic Digital (DVI) Interface
- Digital Single Link DVI Connector
- Supports integrated HDCP 1.1
- TMDS Receiver compliant with DDWG DVI 1.0 Specification
- Supports data transfer rates up to 162 MPixels/S input rate
- Scalable bandwidth from VGA to WUXGA
- High inter-pair skew tolerance up to one full clock cycle
Graphic Analog Interface
- 1 15-pin, Standard VESA DSUB Connector (External Input)
- 1 Molex 50-37-5103 10pin Connector (Internal Input)
- Up to 162 MHz conversion rate
- Supports Analog input up to WUXGA Hz
- 500 MHz Maximum analog bandwidth
- .5 ~ 1.0V Analog input range 75 Ohm terminated
- Offset and Gain adjustment
- Interlaced or progressive inputs
- Supports Separate H/V Sync , Composite H/V Sync (TTL Levels) and Sync-on-Green (SOG)
Video Graphic Modes Compatibility
- All standard video graphic modes up to WUXGA (1920X1200) @60Hz
- Horizontal Frequency 15Khz to 85Khz (Max 162MHz Clock rate)
- Vertical Frequency 50 to 120Hz
Video Interface
- 3 BNC for 1 CVBS, 1 RGB or Component input and 1 Minindin 4pin for 1 Y/C input
- 2 RGB or Y/Cr,Cb inputs via expansion connectors.
- Format : PAL BGDHIN, Combination-PAL N, PAL M,NTSC M, NTSC- Japan, NTSC 4,43 and SECAM (Automatic switching)
- High Performance Digital Video Decoder
- High-Quality A/D converters and associated Clamp and AGC
- Digital Adaptive 2/4 Line Combi Filter
- HPLL for TV mode or VCR mode
- Control: Brightness, Contrast, Saturation, Sharpness
Image Control by On-Screen Display (OSD)
- Brightness
- Contrast
- Sharpness
- Colour Temperature
- Phase and Frequency
- Horizontal and Vertical position
- Auto Adjustments
- PIP / POP
- Aspect
Analog and Digital I/O
- 3 Analog in 0-5V 10-KOhm
- TBD Analog out
- 7 TTL in 10-KOhm P.U.
- 8 LVTTL out 25mA T.P.
Measurement
- Inverter Current 0-30ADC
- Inverter Voltage 0-28VDC
- Panel Current 0-4ADC
- Panel Voltage 0-14VDC
- On-board temperature -55°C to 125°C
- Ambient Light Dark to 10,000lux (Relative measure)
Fan Control
- 1 line without processor control (only setup) 2A-30VDC
- 1 line directly controlled by processor 2A-30VDC
Real Time Clock/Calendar
- For automatic pre-programmed events (St. by, Wk.up, etc.)
- Tracks time in Hours, Minutes, and Seconds ,Day of the Week, Day, Month, and Year
Control Modes
- Seven push-buttons
- Infrared
- Serial RS232
- Serial RS485
Output Panel Signal
- Single or Dual LVDS JEIDA or NS Format
Panel Power Supply
- 3.3 - 5 - 12 VDC / 3A Max.
Inverter Support
- 12-24 VDC Power
- Enable pin signal
- Dimmer Adjust pin signal 0 - 5 VDC
Power requirements
- 12-24 VDC /Min. 5W Max. 600W depending on the panel used
Environmental and Reliability
Operating Conditions
- Temperatures : 0°~ 50°
- Humidity : 10% ~ 80%, non-condensing
- Altitude : maximum 3,000m
Transportation Conditions
- Temperatures : -25°~ 60°
- Humidity : 5% ~ 95%, non-condensing
- Altitude : maximum 15,000m
Storage Conditions
- Temperatures : -20°~ 50°
- Humidity : 5% ~ 95%, non-condensing
- Altitude : maximum 3,000m
