Description
LCD Controller Board VIN6038 is a highly integrated board that interfaces HDMI, DisplayPort, and RGB video inputs in virtually any format to a display.
The VIN6038 is optimised for high-performance monitors and features an advanced, highly integrated image processor with internal HDMI, DisplayPort and 10-bit ADC.
Computer, VGA to WUXGA (1920X1200), images can be scaled to fit a target display device with any resolution, up to WUXGA.
The optimisation circuit creates sharp and clear images, centred on the screen, without user intervention.
LCD Controller Board VIN6038 includes a light sensor for automatic backlight control, a temperature sensor for programmable fan control, and an alarm for faults on the backlight system.
HDMI and DisplayPort inputs are compatible with HDCP (High-bandwidth Digital Content Protection).
Technical Specifications
Chip Set
Panel Connectivity
- All LCD TFT Panels up to 1920X1200 - 4:3 and 16:9
Graphic Digital (HDMI) Interface
- 1 HMDI Standard Connector
- HMDI 1.3 compliant Rx
- Supports resolutions up to 1080p/WUXGA 1920X1200@60Hz
- Deep colour and wide gamut support: 12-bit HDMI input at YCC 4:4:4
- Backwards compatible with DVI
- Supports integrated HDCP
Graphic Digital (DisplayPort) Interface
- 1 DisplayPort Standard Connector
- 4-lane DisplayPort 1.1a compliant Rx
- One auxiliary channel
- Supports integrated HDCP
Graphic Analog Interface
- 1 15-pin, Standard VESA DSUB Connector
- 205 MHz 10-bit ADC supports analogue input up to UXGA 1920X1200@75Hz
- Composite-sync and Sync-on-Green (SOG) support
- Instant AutoTM for automatic phase and clock adjustment
Control by On-Screen Display (OSD)
- Brightness (Backlight adjustment)
- Contrast
- Sharpness
- Colour Temperature
- Phase and Frequency
- Horizontal and Vertical position
- Auto Adjustments
- LVDS Output Mapping National/JEIDA
- LVDS Pixel Order Swapping Odd/Even
- Set-up Temperature Fan ON
Control Modes
- Seven push-buttons
- Infrared (Optional)
- One Serial RS232
Analog and Digital I/O
- 1 Analog in 0-5V 10-KOhm
- 1 TTL in 10-KOhm P.U.
- 2 LVTTL out 25mA T.P.
Output Panel Signal
- 18/24bit Single or Dual LVDS
Panel Power Supply
- 3.3 - 5 - 12 VDC / 3A Max.
Inverter Support
- 12/24 VDC Power
- Enable pin signal
- Analog Dimmer adjust 0 - 3.3VDC or Digital PWM pin signal
Measurement
- On-board temperature or External NTC@10K-Ohm -55°C to 125°C
- Ambient Light Dark to 10,000lux (Relative measure)
Fan Control
- 1 line setup via OSD 12-24VDC 2°
Power requirements
- 12 -24VDC Max 2.5W Only VIN6038 Control Board